Pure Water Management Pvt. Ltd.   Pure Water
 HOME  ABOUT US  PRODUCTS  DOWNLOADS  FAQ’S  VALUES   LOCATION   CONTACT US
Search  
 
GE WATER & PROCESS TECHNOLOGIES
www.gewater.com
J. D. JONES & C0.(P) LTD.
www.jdjones.com
PRAHER VALVES
www.praher-valves.com
SOLUTIA CHEMICALS INDIA (P) LTD. www.solutia.com
 
 
 
  Download Now
 Download Now
 Download Now
 
Description and Use
The Purtrex Plus depth filter, is an exceptional value for general applications where long life, high purity and low change-out frequency are required. Produced through GE Water & Process Technologies’ patented Z.Plex* filter manufacturing technology (Figure 1), Purtrex Plus is a 100% pure polypropylene depth filter with excellent performance. Purtrex Plus’ 3-dimensional filter matrix provides lower pressure drop and high dirt holding capacity. This translates to longer life and fewer change-outs than existing string-wound or resin-bonded filters. Purtrex Plus’ melt-bonded exterior and core ensures no media migration. Purtrex Plus contains no wetting agents, solvents, antistatic agents or binders, and meets the requirements of the FDA for food and beverage contact. The filter incinerates to trace ash for easy disposal.
 
Typical Applications
Potable water filtration
Chemical filtration - wide chemical compatibility
Beverage
Electronics
Meets FDA compliance for food and beverage contact
   
Figure 1 : Purtrex Plus Depth Cartridge Filters Use Z.Plex* Filter Technology
General Properties
Purtrex Plus filters are available the following absolute pore size micron ratings: 1, 3, 5 and 10 microns. Tables 1, 2, 3 and 4 further details on materials of construction, dimensions, flow performance and ordering information.
Additional Information
Purtrex Depth cartridge filters are made from thermally-bonded fibers of polypropylene. GE certifies that it uses no resin binders, lubricants, antistatic or release agents or other additives in the manufacture of these cartridges, and that the resin used for manufacturing the filter media meets the food contact requirements of the U.S. FDA 21 CFR regulations. When required, specify only FDA compliant sealing materials and end adapters. GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your GE distributor for more information.
Ordering Information
To configure a standard Purtrex filter with no adapters on either end, select one item from each of the first three columns. Your model number may look like this: PX05-29 1/4. To order Purtrex filters with end adapters, add one item from the last 2 columns to your filter selections (use all 6 columns). Your model number may look like this: PX05-29 1/4 YYP (see example below) or PX05-29 1/4 XK.
Figure 1 : Purtrex Depth Cartridge Filters
Table 4: Ordering Information
PXP.Zs 01 = 1 μm
03 = 3 μm
05 = 5 μm
10 = 10 μm
10 in. (25.4 cm)
20 in. (50.8 cm)
30 in. (76 cm)
40 in. (102 cm)
X = Standard
Plain End
K = Self Seal
Spring
 

Copyright © 2008 Pure Water Management Pvt. Ltd. All Right Reserved. Designed & Developed By: www.metasenseusa.com