Pure Water Management Pvt. Ltd.   Pure Water
 HOME  ABOUT US  PRODUCTS  DOWNLOADS  FAQ’S  VALUES   LOCATION   CONTACT US
Search  
 
GE WATER & PROCESS TECHNOLOGIES
www.gewater.com
J. D. JONES & C0.(P) LTD.
www.jdjones.com
PRAHER VALVES
www.praher-valves.com
SOLUTIA CHEMICALS INDIA (P) LTD. www.solutia.com
 
 
 
  Download Now
 Download Now
 Download Now
 
Depth Cartridge Filter for Reverse Osmosis Pretreatment Applications with Z.Plex* Filter Technology
 
Features and Benefits
ROsave.Zs is manufactured using patent pending Z.Plex filter technology and is engineered for reverse osmosis pretreatment and other pure water applications. ROsave.Zs' proprietary filter matrix provides unmatched performance in these applications.
Up to twice the life of conventional depth filters
Up to 50% lower pressure drop
Up to 100% greater dirt holding capacity
Superior SDI reduction
Melt-bonded exterior ensures no media migration
Provides lower total cost of filtration operations
NSF 42, FDA approved
   
Applications
Reverse osmosis pretreatment in industries including:
Bottled water
Beverage
Electronics
Figure 1 : Purtrex Plus Depth Cartridge Filters Use Z.Plex* Filter Technology
 
Materials of Construction
  100% polypropylene construction
Dimensions
Nominal O.D. Nominal I.D.
2.5" 1.0"
 
Micron Ratings, Lengths and End Adapters
Micron ratings: 1 and 5 micron
Standard lengths fit most housings - custom lengths are also available
Wide range of end adapters including selfsealing spring, 222 and 226 O-rings, and extended cores.
 
Additional Information
ROsave.Zs cartridge filters are made from thermally bonded fibers of polypropylene. GE Water & Process Technologies certifies that it uses no resin binders, lubricants, antistatic or release agents or other additives in the manufacture of these cartridges, and that the resin used for manufacturing the filter media meets the food contact requirements of U.S. FDA 21CFR regulations. When required, specify only FDA compliant sealing materials and endadapters. GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your GE representative for more information.
Ordering Information
If you are ordering ROsave.Zs filters with standard ends (with no adapter on either end), select one designation from each of the first three columns. Your Product Order Number will look like this: RO.Zs 05-40. If you are ordering ROsave.Zs with end adapters, select designations from all applicable columns. Your Product Order Number will look like this: RO.Zs 05- 40 XK.
 
        RO.Zs
        I.D. = 1.0
        O.D. = 2.5
                01 = 1
                05 = 5
                9 ¾ (24.8)
                9 7/8 (25.1)
                10 (25.4)
                19 ½ (49.5)
                20 (50.8)
                29 ¼ (74.3)
                30 (76.2)
                40 (101.6)
     L = Extended Core
     E = 222 O-Ring
     F = 226 O-Ring
     X = Standard
     Rosave.Zs plain
     end (no gasket)
  K = self seal adapter
  H = Fin
  S = Solid End X =   Standard
  Rosave.Zs plain
  end (no gasket)
     O = Rings
     S = Silicone
     E = EPDM
     V = Viton1
     B = Buna
1 Viton is a trademark of DuPont Dow Elastomers.
 

Copyright © 2008 Pure Water Management Pvt. Ltd. All Right Reserved. Designed & Developed By: www.metasenseusa.com